My calculator's decimal symbol somehow changed from a period to a comma and the ,000 separator is now a period instead of a comma. I dunno how this happened but its annoying as hell and I want the normal way back.
Anyone?作者: aidebaobao 时间: 2011-7-13 17:00
turn calc off. hold down the decimal point key ( . )
turn calc on.作者: Analyze_This 时间: 2011-7-13 17:00
It's not working...how long to hold it down? I tried up to a minute and it's not changing作者: cityboy 时间: 2011-7-13 17:00
you don't have to hold long at all...
are you holding the . button while you press the on button?作者: Analti_Calte 时间: 2011-7-13 17:01
It should do it automatically - you have to make sure you are pressing on the "." when you turn it on.
It should toggle between 0.0000 and 0,0000 each time you do it.
Edited 1 time(s). Last edit at Tuesday, June 17, 2008 at 06:23PM by Data_Monkey.作者: bboo 时间: 2011-7-13 17:01
*cough* TI *cough*作者: bodhisattva 时间: 2011-7-13 17:01
hi any HP12C expert!
help needed! not sure what did i press, now my HP12C got a ALG at the bottom..how to get it off? check the manual and cant find anything also....thanks作者: Iginla2011 时间: 2011-7-13 17:01
I hope you are not joking. f RPN should bring you back to the reverse polish notation mode from the ALGebraic calculation mode作者: nannan66 时间: 2011-7-13 17:01
I see...so the RPN will be there under normal use (this is new HP12C platinum). and when i check the old hp12c noticed there is no such function (ie ALG or RPN) hence the confusion. thanks作者: Zestt 时间: 2011-7-13 17:01
Reset to factory settings:
when HP12C is OFF,
1.Press and hold [ON]
2.Press and hold [-]
3 Release [ON]
4 Release [-]
factory set complete
Check all electrical circuitry is working properly (takes like 3 minutes)
HP12C is OFF,
1.Press and hold [ON]
2.Press and hold [+]
3 Release [ON]
4 Release [+]
If all the lCD screen is filled, then 12C is working.作者: bpdulog 时间: 2011-7-13 17:01
